diff --git a/.github/pull_request_template.md b/.github/pull_request_template.md new file mode 100644 index 0000000..f401c9f --- /dev/null +++ b/.github/pull_request_template.md @@ -0,0 +1,8 @@ +*************************************************************************** +**NOTE** +Please verify that the `base repository` above has the intended destination! +Github by default opens Pull Requests against the parent of a forked repository. +If this is your personal fork and you didn't intend to open a PR for contribution +to the original project then adjust the `base repository` accordingly. +************************************************************************** + diff --git a/README.md b/README.md index 0f0bb1b..f445b65 100644 --- a/README.md +++ b/README.md @@ -21,12 +21,10 @@ If you are experiencing issues, please make sure you have the latest versions. ### Install External Dependencies -> **NOTE** -> [Backup](#FAQ) your previous configuration (if any exists) - External Requirements: - Basic utils: `git`, `make`, `unzip`, C Compiler (`gcc`) - [ripgrep](https://github.com/BurntSushi/ripgrep#installation) +- Clipboard tool (xclip/xsel/win32yank or other depending on platform) - A [Nerd Font](https://www.nerdfonts.com/): optional, provides various icons - if you have it set `vim.g.have_nerd_font` in `init.lua` to true - Language Setup: @@ -35,7 +33,13 @@ External Requirements: - etc. > **NOTE** -> See [Windows Installation](#Windows-Installation) to double check any additional Windows notes +> See [Install Recipes](#Install-Recipes) for additional Windows and Linux specific notes +> and quick install snippets + +### Install Kickstart + +> **NOTE** +> [Backup](#FAQ) your previous configuration (if any exists) Neovim's configurations are located under the following paths, depending on your OS: @@ -45,9 +49,20 @@ Neovim's configurations are located under the following paths, depending on your | Windows (cmd)| `%userprofile%\AppData\Local\nvim\` | | Windows (powershell)| `$env:USERPROFILE\AppData\Local\nvim\` | -### Install Kickstart +#### Recommended Step -Clone kickstart.nvim: +[Fork](https://docs.github.com/en/get-started/quickstart/fork-a-repo) this repo +so that you have your own copy that you can modify, then install by cloning the +fork to your machine using one of the commands below, depending on your OS. + +> **NOTE** +> Your fork's url will be something like this: +> `https://github.com//kickstart.nvim.git` + +#### Clone kickstart.nvim +> **NOTE** +> If following the recommended step above (i.e., forking the repo), replace +> `nvim-lua` with `` in the commands below
Linux and Mac @@ -82,93 +97,34 @@ nvim ``` That's it! Lazy will install all the plugins you have. Use `:Lazy` to view -current plugin status. +current plugin status. Hit `q` to close the window. Read through the `init.lua` file in your configuration folder for more -information about extending and exploring Neovim. +information about extending and exploring Neovim. That also includes +examples of adding popularly requested plugins. + ### Getting Started [The Only Video You Need to Get Started with Neovim](https://youtu.be/m8C0Cq9Uv9o) -### Recommended Steps - -[Fork](https://docs.github.com/en/get-started/quickstart/fork-a-repo) this repo -(so that you have your own copy that you can modify) and then install. You -can install it on your machine using the methods above. - -> **NOTE** -> Your fork's url will be something like this: `https://github.com//kickstart.nvim.git` - -#### Examples of adding popularly requested plugins - -NOTE: You'll need to uncomment the line in the init.lua that turns on loading custom plugins. - -
- Adding autopairs - -This will automatically install [windwp/nvim-autopairs](https://github.com/windwp/nvim-autopairs) and enable it on startup. For more information, see documentation for [lazy.nvim](https://github.com/folke/lazy.nvim). - -In the file: `lua/custom/plugins/autopairs.lua`, add: - -```lua --- File: lua/custom/plugins/autopairs.lua - -return { - "windwp/nvim-autopairs", - -- Optional dependency - dependencies = { 'hrsh7th/nvim-cmp' }, - config = function() - require("nvim-autopairs").setup {} - -- If you want to automatically add `(` after selecting a function or method - local cmp_autopairs = require('nvim-autopairs.completion.cmp') - local cmp = require('cmp') - cmp.event:on( - 'confirm_done', - cmp_autopairs.on_confirm_done() - ) - end, -} -``` - -
-
- Adding a file tree plugin - -This will install the tree plugin and add the command `:Neotree` for you. For more information, see the documentation at [neo-tree.nvim](https://github.com/nvim-neo-tree/neo-tree.nvim). - -In the file: `lua/custom/plugins/filetree.lua`, add: - -```lua --- File: lua/custom/plugins/filetree.lua - -return { - "nvim-neo-tree/neo-tree.nvim", - version = "*", - dependencies = { - "nvim-lua/plenary.nvim", - "nvim-tree/nvim-web-devicons", -- not strictly required, but recommended - "MunifTanjim/nui.nvim", - }, - config = function () - require('neo-tree').setup {} - end, -} -``` - -
- ### FAQ * What should I do if I already have a pre-existing neovim configuration? * You should back it up and then delete all associated files. - * This includes your existing init.lua and the neovim files in `~/.local` which can be deleted with `rm -rf ~/.local/share/nvim/` + * This includes your existing init.lua and the neovim files in `~/.local` + which can be deleted with `rm -rf ~/.local/share/nvim/` * Can I keep my existing configuration in parallel to kickstart? - * Yes! You can use [NVIM_APPNAME](https://neovim.io/doc/user/starting.html#%24NVIM_APPNAME)`=nvim-NAME` to maintain multiple configurations. For example, you can install the kickstart configuration in `~/.config/nvim-kickstart` and create an alias: + * Yes! You can use [NVIM_APPNAME](https://neovim.io/doc/user/starting.html#%24NVIM_APPNAME)`=nvim-NAME` + to maintain multiple configurations. For example, you can install the kickstart + configuration in `~/.config/nvim-kickstart` and create an alias: ``` alias nvim-kickstart='NVIM_APPNAME="nvim-kickstart" nvim' ``` - When you run Neovim using `nvim-kickstart` alias it will use the alternative config directory and the matching local directory `~/.local/share/nvim-kickstart`. You can apply this approach to any Neovim distribution that you would like to try out. + When you run Neovim using `nvim-kickstart` alias it will use the alternative + config directory and the matching local directory + `~/.local/share/nvim-kickstart`. You can apply this approach to any Neovim + distribution that you would like to try out. * What if I want to "uninstall" this configuration: * See [lazy.nvim uninstall](https://github.com/folke/lazy.nvim#-uninstalling) information * Why is the kickstart `init.lua` a single file? Wouldn't it make sense to split it into multiple files? @@ -182,8 +138,15 @@ return { * [Restructure the configuration](https://github.com/nvim-lua/kickstart.nvim/issues/218) * [Reorganize init.lua into a multi-file setup](https://github.com/nvim-lua/kickstart.nvim/pull/473) -### Windows Installation +### Install Recipes +Below you can find OS specific install instructions for Neovim and dependencies. + +After installing all the dependencies continue with the [Install Kickstart](#Install-Kickstart) step. + +#### Windows Installation + +
Windows with Microsoft C++ Build Tools and CMake Installation may require installing build tools and updating the run command for `telescope-fzf-native` See `telescope-fzf-native` documentation for [more details](https://github.com/nvim-telescope/telescope-fzf-native.nvim#installation) @@ -195,7 +158,8 @@ This requires: ```lua {'nvim-telescope/telescope-fzf-native.nvim', build = 'cmake -S. -Bbuild -DCMAKE_BUILD_TYPE=Release && cmake --build build --config Release && cmake --install build --prefix build' } ``` - +
+
Windows with gcc/make using chocolatey Alternatively, one can install gcc and make which don't require changing the config, the easiest way is to use choco: @@ -211,5 +175,55 @@ open a new one so that choco path is set, and run in cmd as **admin**: ``` choco install -y neovim git ripgrep wget fd unzip gzip mingw make ``` +
+
WSL (Windows Subsystem for Linux) + +``` +wsl --install +wsl +sudo add-apt-repository ppa:neovim-ppa/unstable -y +sudo apt update +sudo apt install make gcc ripgrep unzip git xclip neovim +``` +
+ +#### Linux Install +
Ubuntu Install Steps + +``` +sudo add-apt-repository ppa:neovim-ppa/unstable -y +sudo apt update +sudo apt install make gcc ripgrep unzip git xclip neovim +``` +
+
Debian Install Steps + +``` +sudo apt update +sudo apt install make gcc ripgrep unzip git xclip curl + +# Now we install nvim +curl -LO https://github.com/neovim/neovim/releases/latest/download/nvim-linux64.tar.gz +sudo rm -rf /opt/nvim-linux64 +sudo mkdir -p /opt/nvim-linux64 +sudo chmod a+rX /opt/nvim-linux64 +sudo tar -C /opt -xzf nvim-linux64.tar.gz + +# make it available in /usr/local/bin, distro installs to /usr/bin +sudo ln -sf /opt/nvim-linux64/bin/nvim /usr/local/bin/ +``` +
+
Fedora Install Steps + +``` +sudo dnf install -y gcc make git ripgrep fd-find unzip neovim +``` +
+ +
Arch Install Steps + +``` +sudo pacman -S --noconfirm --needed gcc make git ripgrep fd unzip neovim +``` +
-Then, continue with the [Install Kickstart](#Install-Kickstart) step. diff --git a/init.lua b/init.lua index 0ace4d7..aa0657a 100644 --- a/init.lua +++ b/init.lua @@ -29,7 +29,7 @@ What is Kickstart? what your configuration is doing, and modify it to suit your needs. Once you've done that, you can start exploring, configuring and tinkering to - make Neovim your own! That might mean leaving kickstart just the way it is for a while + make Neovim your own! That might mean leaving Kickstart just the way it is for a while or immediately breaking it into modular pieces. It's up to you! If you don't know anything about Lua, I recommend taking some time to read through @@ -51,32 +51,32 @@ Kickstart Guide: - Tutor - - (If you already know how the Neovim basics, you can skip this step) + (If you already know the Neovim basics, you can skip this step.) Once you've completed that, you can continue working through **AND READING** the rest - of the kickstart init.lua + of the kickstart init.lua. Next, run AND READ `:help`. This will open up a help window with some basic information about reading, navigating and searching the builtin help documentation. This should be the first place you go to look when you're stuck or confused - with something. It's one of my favorite neovim features. + with something. It's one of my favorite Neovim features. MOST IMPORTANTLY, we provide a keymap "sh" to [s]earch the [h]elp documentation, - which is very useful when you're not sure exactly what you're looking for. + which is very useful when you're not exactly sure of what you're looking for. I have left several `:help X` comments throughout the init.lua These are hints about where to find more information about the relevant settings, - plugins or neovim features used in kickstart. + plugins or Neovim features used in Kickstart. NOTE: Look for lines like this - Throughout the file. These are for you, the reader, to help understand what is happening. + Throughout the file. These are for you, the reader, to help you understand what is happening. Feel free to delete them once you know what you're doing, but they should serve as a guide - for when you are first encountering a few different constructs in your nvim config. + for when you are first encountering a few different constructs in your Neovim config. -If you experience any errors while trying to install kickstart, run `:checkhealth` for more info +If you experience any errors while trying to install kickstart, run `:checkhealth` for more info. I hope you enjoy your Neovim journey, - TJ @@ -90,7 +90,7 @@ P.S. You can delete this when you're done too. It's your config now! :) vim.g.mapleader = ' ' vim.g.maplocalleader = ' ' --- Set to true if you have a Nerd Font installed +-- Set to true if you have a Nerd Font installed and selected in the terminal vim.g.have_nerd_font = false -- [[ Setting options ]] @@ -100,14 +100,14 @@ vim.g.have_nerd_font = false -- Make line numbers default vim.opt.number = true --- You can also add relative line numbers, for help with jumping. +-- You can also add relative line numbers, to help with jumping. -- Experiment for yourself to see if you like it! -- vim.opt.relativenumber = true -- Enable mouse mode, can be useful for resizing splits for example! vim.opt.mouse = 'a' --- Don't show the mode, since it's already in status line +-- Don't show the mode, since it's already in the status line vim.opt.showmode = false -- Sync clipboard between OS and Neovim. @@ -121,7 +121,7 @@ vim.opt.breakindent = true -- Save undo history vim.opt.undofile = true --- Case-insensitive searching UNLESS \C or capital in search +-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term vim.opt.ignorecase = true vim.opt.smartcase = true @@ -139,7 +139,7 @@ vim.opt.timeoutlen = 300 vim.opt.splitright = true vim.opt.splitbelow = true --- Sets how neovim will display certain whitespace in the editor. +-- Sets how neovim will display certain whitespace characters in the editor. -- See `:help 'list'` -- and `:help 'listchars'` vim.opt.list = true @@ -209,7 +209,10 @@ vim.api.nvim_create_autocmd('TextYankPost', { local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim' if not vim.loop.fs_stat(lazypath) then local lazyrepo = 'https://github.com/folke/lazy.nvim.git' - vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath } + local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath } + if vim.v.shell_error ~= 0 then + error('Error cloning lazy.nvim:\n' .. out) + end end ---@diagnostic disable-next-line: undefined-field vim.opt.rtp:prepend(lazypath) @@ -220,7 +223,7 @@ vim.opt.rtp:prepend(lazypath) -- -- You can press `?` in this menu for help. Use `:q` to close the window -- --- To update plugins, you can run +-- To update plugins you can run -- :Lazy update -- -- NOTE: Here is where you install your plugins. @@ -241,7 +244,7 @@ require('lazy').setup({ { 'numToStr/Comment.nvim', opts = {} }, -- Here is a more advanced example where we pass configuration - -- options to `gitsigns.nvim`. This is equivalent to the following lua: + -- options to `gitsigns.nvim`. This is equivalent to the following Lua: -- require('gitsigns').setup({ ... }) -- -- See `:help gitsigns` to understand what the configuration keys do @@ -319,7 +322,7 @@ require('lazy').setup({ }, }, - -- NOTE: Plugins can also be configured to run lua code when they are loaded. + -- NOTE: Plugins can also be configured to run Lua code when they are loaded. -- -- This is often very useful to both group configuration, as well as handle -- lazy loading plugins that don't need to be loaded immediately at startup. @@ -341,12 +344,14 @@ require('lazy').setup({ require('which-key').setup() -- Document existing key chains - require('which-key').register { - ['c'] = { name = '[C]ode', _ = 'which_key_ignore' }, - ['d'] = { name = '[D]ocument', _ = 'which_key_ignore' }, - ['r'] = { name = '[R]ename', _ = 'which_key_ignore' }, - ['s'] = { name = '[S]earch', _ = 'which_key_ignore' }, - ['w'] = { name = '[W]orkspace', _ = 'which_key_ignore' }, + require('which-key').add { + { 'c', group = '[C]ode' }, + { 'd', group = '[D]ocument' }, + { 'r', group = '[R]ename' }, + { 's', group = '[S]earch' }, + { 'w', group = '[W]orkspace' }, + { 't', group = '[T]oggle' }, + { 'h', group = 'Git [H]unk', mode = { 'n', 'v' } }, } end, }, @@ -364,7 +369,7 @@ require('lazy').setup({ branch = '0.1.x', dependencies = { 'nvim-lua/plenary.nvim', - { -- If encountering errors, see telescope-fzf-native README for install instructions + { -- If encountering errors, see telescope-fzf-native README for installation instructions 'nvim-telescope/telescope-fzf-native.nvim', -- `build` is used to run some command when the plugin is installed/updated. @@ -387,19 +392,19 @@ require('lazy').setup({ -- it can fuzzy find! It's more than just a "file finder", it can search -- many different aspects of Neovim, your workspace, LSP, and more! -- - -- The easiest way to use telescope, is to start by doing something like: + -- The easiest way to use Telescope, is to start by doing something like: -- :Telescope help_tags -- -- After running this command, a window will open up and you're able to - -- type in the prompt window. You'll see a list of help_tags options and + -- type in the prompt window. You'll see a list of `help_tags` options and -- a corresponding preview of the help. -- - -- Two important keymaps to use while in telescope are: + -- Two important keymaps to use while in Telescope are: -- - Insert mode: -- - Normal mode: ? -- -- This opens a window that shows you all of the keymaps for the current - -- telescope picker. This is really useful to discover what Telescope can + -- Telescope picker. This is really useful to discover what Telescope can -- do as well as how to actually do it! -- [[ Configure Telescope ]] @@ -421,7 +426,7 @@ require('lazy').setup({ }, } - -- Enable telescope extensions, if they are installed + -- Enable Telescope extensions if they are installed pcall(require('telescope').load_extension, 'fzf') pcall(require('telescope').load_extension, 'ui-select') @@ -448,14 +453,14 @@ require('lazy').setup({ -- Slightly advanced example of overriding default behavior and theme vim.keymap.set('n', '/', function() - -- You can pass additional configuration to telescope to change theme, layout, etc. + -- You can pass additional configuration to Telescope to change the theme, layout, etc. builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { winblend = 10, previewer = false, }) end, { desc = '[/] Fuzzily search in current buffer' }) - -- Also possible to pass additional configuration options. + -- It's also possible to pass additional configuration options. -- See `:help telescope.builtin.live_grep()` for information about particular keys vim.keymap.set('n', 's/', function() builtin.live_grep { @@ -464,7 +469,7 @@ require('lazy').setup({ } end, { desc = '[S]earch [/] in Open Files' }) - -- Shortcut for searching your neovim configuration files + -- Shortcut for searching your Neovim configuration files vim.keymap.set('n', 'sn', function() builtin.find_files { cwd = vim.fn.stdpath 'config' } end, { desc = '[S]earch [N]eovim files' }) @@ -474,8 +479,8 @@ require('lazy').setup({ { -- LSP Configuration & Plugins 'neovim/nvim-lspconfig', dependencies = { - -- Automatically install LSPs and related tools to stdpath for neovim - 'williamboman/mason.nvim', + -- Automatically install LSPs and related tools to stdpath for Neovim + { 'williamboman/mason.nvim', config = true }, -- NOTE: Must be loaded before dependants 'williamboman/mason-lspconfig.nvim', 'WhoIsSethDaniel/mason-tool-installer.nvim', @@ -488,15 +493,15 @@ require('lazy').setup({ { 'folke/neodev.nvim', opts = {} }, }, config = function() - -- Brief Aside: **What is LSP?** + -- Brief aside: **What is LSP?** -- - -- LSP is an acronym you've probably heard, but might not understand what it is. + -- LSP is an initialism you've probably heard, but might not understand what it is. -- -- LSP stands for Language Server Protocol. It's a protocol that helps editors -- and language tooling communicate in a standardized fashion. -- -- In general, you have a "server" which is some tool built to understand a particular - -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc). These Language Servers + -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone -- processes that communicate with some "client" - in this case, Neovim! -- @@ -520,9 +525,8 @@ require('lazy').setup({ vim.api.nvim_create_autocmd('LspAttach', { group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }), callback = function(event) - -- NOTE: Remember that lua is a real programming language, and as such it is possible - -- to define small helper and utility functions so you don't have to repeat yourself - -- many times. + -- NOTE: Remember that Lua is a real programming language, and as such it is possible + -- to define small helper and utility functions so you don't have to repeat yourself. -- -- In this case, we create a function that lets us more easily define mappings specific -- for LSP related items. It sets the mode, buffer and description for us each time. @@ -551,11 +555,11 @@ require('lazy').setup({ -- Symbols are things like variables, functions, types, etc. map('ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols') - -- Fuzzy find all the symbols in your current workspace - -- Similar to document symbols, except searches over your whole project. + -- Fuzzy find all the symbols in your current workspace. + -- Similar to document symbols, except searches over your entire project. map('ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols') - -- Rename the variable under your cursor + -- Rename the variable under your cursor. -- Most Language Servers support renaming across files, etc. map('rn', vim.lsp.buf.rename, '[R]e[n]ame') @@ -564,11 +568,11 @@ require('lazy').setup({ map('ca', vim.lsp.buf.code_action, '[C]ode [A]ction') -- Opens a popup that displays documentation about the word under your cursor - -- See `:help K` for why this keymap + -- See `:help K` for why this keymap. map('K', vim.lsp.buf.hover, 'Hover Documentation') -- WARN: This is not Goto Definition, this is Goto Declaration. - -- For example, in C this would take you to the header + -- For example, in C this would take you to the header. map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration') -- The following two autocommands are used to highlight references of the @@ -578,21 +582,42 @@ require('lazy').setup({ -- When you move your cursor, the highlights will be cleared (the second autocommand). local client = vim.lsp.get_client_by_id(event.data.client_id) if client and client.server_capabilities.documentHighlightProvider then + local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false }) vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, { buffer = event.buf, + group = highlight_augroup, callback = vim.lsp.buf.document_highlight, }) vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, { buffer = event.buf, + group = highlight_augroup, callback = vim.lsp.buf.clear_references, }) + + vim.api.nvim_create_autocmd('LspDetach', { + group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }), + callback = function(event2) + vim.lsp.buf.clear_references() + vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf } + end, + }) + end + + -- The following autocommand is used to enable inlay hints in your + -- code, if the language server you are using supports them + -- + -- This may be unwanted, since they displace some of your code + if client and client.server_capabilities.inlayHintProvider and vim.lsp.inlay_hint then + map('th', function() + vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled()) + end, '[T]oggle Inlay [H]ints') end end, }) -- LSP servers and clients are able to communicate to each other what features they support. - -- By default, Neovim doesn't support everything that is in the LSP Specification. + -- By default, Neovim doesn't support everything that is in the LSP specification. -- When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities. -- So, we create new capabilities with nvim cmp, and then broadcast that to the servers. local capabilities = vim.lsp.protocol.make_client_capabilities() @@ -623,7 +648,7 @@ require('lazy').setup({ lua_ls = { -- cmd = {...}, - -- filetypes { ...}, + -- filetypes = { ...}, -- capabilities = {}, settings = { Lua = { @@ -642,14 +667,14 @@ require('lazy').setup({ -- other tools, you can run -- :Mason -- - -- You can press `g?` for help in this menu + -- You can press `g?` for help in this menu. require('mason').setup() -- You can add other tools here that you want Mason to install -- for you, so that they are available from within Neovim. local ensure_installed = vim.tbl_keys(servers or {}) vim.list_extend(ensure_installed, { - 'stylua', -- Used to format lua code + 'stylua', -- Used to format Lua code }) require('mason-tool-installer').setup { ensure_installed = ensure_installed } @@ -670,6 +695,17 @@ require('lazy').setup({ { -- Autoformat 'stevearc/conform.nvim', + lazy = false, + keys = { + { + 'f', + function() + require('conform').format { async = true, lsp_fallback = true } + end, + mode = '', + desc = '[F]ormat buffer', + }, + }, opts = { notify_on_error = false, format_on_save = function(bufnr) @@ -702,9 +738,9 @@ require('lazy').setup({ { 'L3MON4D3/LuaSnip', build = (function() - -- Build Step is needed for regex support in snippets - -- This step is not supported in many windows environments - -- Remove the below condition to re-enable on windows + -- Build Step is needed for regex support in snippets. + -- This step is not supported in many windows environments. + -- Remove the below condition to re-enable on windows. if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then return end @@ -754,7 +790,7 @@ require('lazy').setup({ -- Select the [p]revious item [''] = cmp.mapping.select_prev_item(), - -- scroll the documentation window [b]ack / [f]orward + -- Scroll the documentation window [b]ack / [f]orward [''] = cmp.mapping.scroll_docs(-4), [''] = cmp.mapping.scroll_docs(4), @@ -763,6 +799,12 @@ require('lazy').setup({ -- This will expand snippets if the LSP sent a snippet. [''] = cmp.mapping.confirm { select = true }, + -- If you prefer more traditional completion keymaps, + -- you can uncomment the following lines + --[''] = cmp.mapping.confirm { select = true }, + --[''] = cmp.mapping.select_next_item(), + --[''] = cmp.mapping.select_prev_item(), + -- Manually trigger a completion from nvim-cmp. -- Generally you don't need this, because nvim-cmp will display -- completions whenever it has completion options available. @@ -787,7 +829,7 @@ require('lazy').setup({ end end, { 'i', 's' }), - -- For more advanced luasnip keymaps (e.g. selecting choice nodes, expansion) see: + -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps }, sources = { @@ -801,16 +843,18 @@ require('lazy').setup({ { -- You can easily change to a different colorscheme. -- Change the name of the colorscheme plugin below, and then - -- change the command in the config to whatever the name of that colorscheme is + -- change the command in the config to whatever the name of that colorscheme is. -- - -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme` + -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`. 'folke/tokyonight.nvim', - priority = 1000, -- make sure to load this before all the other start plugins - config = function() - -- Load the colorscheme here + priority = 1000, -- Make sure to load this before all the other start plugins. + init = function() + -- Load the colorscheme here. + -- Like many other themes, this one has different styles, and you could load + -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'. vim.cmd.colorscheme 'onedark' - -- You can configure highlights by doing something like + -- You can configure highlights by doing something like: vim.cmd.hi 'Comment gui=none' end, }, @@ -855,13 +899,14 @@ require('lazy').setup({ -- Check out: https://github.com/echasnovski/mini.nvim end, }, - { -- Highlight, edit, and navigate code 'nvim-treesitter/nvim-treesitter', build = ':TSUpdate', opts = { ensure_installed = { 'lua', + 'diff', + 'luadoc', 'python', 'tsx', 'javascript', @@ -896,6 +941,8 @@ require('lazy').setup({ config = function(_, opts) -- [[ Configure Treesitter ]] See `:help nvim-treesitter` + -- Prefer git instead of curl in order to improve connectivity in some environments + require('nvim-treesitter.install').prefer_git = true ---@diagnostic disable-next-line: missing-fields require('nvim-treesitter.configs').setup(opts) @@ -979,15 +1026,19 @@ require('lazy').setup({ -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the -- init.lua. If you want these files, they are in the repository, so you can just download them and - -- put them in the right spots if you want. + -- place them in the correct locations. - -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for kickstart + -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart -- - -- Here are some example plugins that I've included in the kickstart repository. + -- Here are some example plugins that I've included in the Kickstart repository. -- Uncomment any of the lines below to enable them (you will need to restart nvim). -- -- require 'kickstart.plugins.debug', -- require 'kickstart.plugins.indent_line', + -- require 'kickstart.plugins.lint', + -- require 'kickstart.plugins.autopairs', + -- require 'kickstart.plugins.neo-tree', + -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua` -- This is the easiest way to modularize your config. @@ -997,8 +1048,8 @@ require('lazy').setup({ -- { import = 'custom.plugins' }, }, { ui = { - -- If you have a Nerd Font, set icons to an empty table which will use the - -- default lazy.nvim defined Nerd Font icons otherwise define a unicode icons table + -- If you are using a Nerd Font: set icons to an empty table which will use the + -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table icons = vim.g.have_nerd_font and {} or { cmd = '⌘', config = '🛠', diff --git a/lua/kickstart/plugins/autopairs.lua b/lua/kickstart/plugins/autopairs.lua new file mode 100644 index 0000000..87a7e5f --- /dev/null +++ b/lua/kickstart/plugins/autopairs.lua @@ -0,0 +1,16 @@ +-- autopairs +-- https://github.com/windwp/nvim-autopairs + +return { + 'windwp/nvim-autopairs', + event = 'InsertEnter', + -- Optional dependency + dependencies = { 'hrsh7th/nvim-cmp' }, + config = function() + require('nvim-autopairs').setup {} + -- If you want to automatically add `(` after selecting a function or method + local cmp_autopairs = require 'nvim-autopairs.completion.cmp' + local cmp = require 'cmp' + cmp.event:on('confirm_done', cmp_autopairs.on_confirm_done()) + end, +} diff --git a/lua/kickstart/plugins/debug.lua b/lua/kickstart/plugins/debug.lua index 7fc783f..31dfecf 100644 --- a/lua/kickstart/plugins/debug.lua +++ b/lua/kickstart/plugins/debug.lua @@ -14,6 +14,9 @@ return { -- Creates a beautiful debugger UI 'rcarriga/nvim-dap-ui', + -- Required dependency for nvim-dap-ui + 'nvim-neotest/nvim-nio', + -- Installs the debug adapters for you 'williamboman/mason.nvim', 'jay-babu/mason-nvim-dap.nvim', @@ -28,7 +31,7 @@ return { require('mason-nvim-dap').setup { -- Makes a best effort to setup the various debuggers with -- reasonable debug configurations - automatic_setup = true, + automatic_installation = true, -- You can provide additional configuration to the handlers, -- see mason-nvim-dap README for more information @@ -82,6 +85,12 @@ return { dap.listeners.before.event_exited['dapui_config'] = dapui.close -- Install golang specific config - require('dap-go').setup() + require('dap-go').setup { + delve = { + -- On Windows delve must be run attached or it crashes. + -- See https://github.com/leoluz/nvim-dap-go/blob/main/README.md#configuring + detached = vim.fn.has 'win32' == 0, + }, + } end, } diff --git a/lua/kickstart/plugins/gitsigns.lua b/lua/kickstart/plugins/gitsigns.lua new file mode 100644 index 0000000..4bcc70f --- /dev/null +++ b/lua/kickstart/plugins/gitsigns.lua @@ -0,0 +1,61 @@ +-- Adds git related signs to the gutter, as well as utilities for managing changes +-- NOTE: gitsigns is already included in init.lua but contains only the base +-- config. This will add also the recommended keymaps. + +return { + { + 'lewis6991/gitsigns.nvim', + opts = { + on_attach = function(bufnr) + local gitsigns = require 'gitsigns' + + local function map(mode, l, r, opts) + opts = opts or {} + opts.buffer = bufnr + vim.keymap.set(mode, l, r, opts) + end + + -- Navigation + map('n', ']c', function() + if vim.wo.diff then + vim.cmd.normal { ']c', bang = true } + else + gitsigns.nav_hunk 'next' + end + end, { desc = 'Jump to next git [c]hange' }) + + map('n', '[c', function() + if vim.wo.diff then + vim.cmd.normal { '[c', bang = true } + else + gitsigns.nav_hunk 'prev' + end + end, { desc = 'Jump to previous git [c]hange' }) + + -- Actions + -- visual mode + map('v', 'hs', function() + gitsigns.stage_hunk { vim.fn.line '.', vim.fn.line 'v' } + end, { desc = 'stage git hunk' }) + map('v', 'hr', function() + gitsigns.reset_hunk { vim.fn.line '.', vim.fn.line 'v' } + end, { desc = 'reset git hunk' }) + -- normal mode + map('n', 'hs', gitsigns.stage_hunk, { desc = 'git [s]tage hunk' }) + map('n', 'hr', gitsigns.reset_hunk, { desc = 'git [r]eset hunk' }) + map('n', 'hS', gitsigns.stage_buffer, { desc = 'git [S]tage buffer' }) + map('n', 'hu', gitsigns.undo_stage_hunk, { desc = 'git [u]ndo stage hunk' }) + map('n', 'hR', gitsigns.reset_buffer, { desc = 'git [R]eset buffer' }) + map('n', 'hp', gitsigns.preview_hunk, { desc = 'git [p]review hunk' }) + map('n', 'hb', gitsigns.blame_line, { desc = 'git [b]lame line' }) + map('n', 'hd', gitsigns.diffthis, { desc = 'git [d]iff against index' }) + map('n', 'hD', function() + gitsigns.diffthis '@' + end, { desc = 'git [D]iff against last commit' }) + -- Toggles + map('n', 'tb', gitsigns.toggle_current_line_blame, { desc = '[T]oggle git show [b]lame line' }) + map('n', 'tD', gitsigns.toggle_deleted, { desc = '[T]oggle git show [D]eleted' }) + end, + }, + }, +} diff --git a/lua/kickstart/plugins/lint.lua b/lua/kickstart/plugins/lint.lua new file mode 100644 index 0000000..7f0dc42 --- /dev/null +++ b/lua/kickstart/plugins/lint.lua @@ -0,0 +1,55 @@ +return { + + { -- Linting + 'mfussenegger/nvim-lint', + event = { 'BufReadPre', 'BufNewFile' }, + config = function() + local lint = require 'lint' + lint.linters_by_ft = { + markdown = { 'markdownlint' }, + } + + -- To allow other plugins to add linters to require('lint').linters_by_ft, + -- instead set linters_by_ft like this: + -- lint.linters_by_ft = lint.linters_by_ft or {} + -- lint.linters_by_ft['markdown'] = { 'markdownlint' } + -- + -- However, note that this will enable a set of default linters, + -- which will cause errors unless these tools are available: + -- { + -- clojure = { "clj-kondo" }, + -- dockerfile = { "hadolint" }, + -- inko = { "inko" }, + -- janet = { "janet" }, + -- json = { "jsonlint" }, + -- markdown = { "vale" }, + -- rst = { "vale" }, + -- ruby = { "ruby" }, + -- terraform = { "tflint" }, + -- text = { "vale" } + -- } + -- + -- You can disable the default linters by setting their filetypes to nil: + -- lint.linters_by_ft['clojure'] = nil + -- lint.linters_by_ft['dockerfile'] = nil + -- lint.linters_by_ft['inko'] = nil + -- lint.linters_by_ft['janet'] = nil + -- lint.linters_by_ft['json'] = nil + -- lint.linters_by_ft['markdown'] = nil + -- lint.linters_by_ft['rst'] = nil + -- lint.linters_by_ft['ruby'] = nil + -- lint.linters_by_ft['terraform'] = nil + -- lint.linters_by_ft['text'] = nil + + -- Create autocommand which carries out the actual linting + -- on the specified events. + local lint_augroup = vim.api.nvim_create_augroup('lint', { clear = true }) + vim.api.nvim_create_autocmd({ 'BufEnter', 'BufWritePost', 'InsertLeave' }, { + group = lint_augroup, + callback = function() + require('lint').try_lint() + end, + }) + end, + }, +} diff --git a/lua/kickstart/plugins/neo-tree.lua b/lua/kickstart/plugins/neo-tree.lua new file mode 100644 index 0000000..c793b88 --- /dev/null +++ b/lua/kickstart/plugins/neo-tree.lua @@ -0,0 +1,25 @@ +-- Neo-tree is a Neovim plugin to browse the file system +-- https://github.com/nvim-neo-tree/neo-tree.nvim + +return { + 'nvim-neo-tree/neo-tree.nvim', + version = '*', + dependencies = { + 'nvim-lua/plenary.nvim', + 'nvim-tree/nvim-web-devicons', -- not strictly required, but recommended + 'MunifTanjim/nui.nvim', + }, + cmd = 'Neotree', + keys = { + { '\\', ':Neotree reveal', { desc = 'NeoTree reveal' } }, + }, + opts = { + filesystem = { + window = { + mappings = { + ['\\'] = 'close_window', + }, + }, + }, + }, +}