Merge branch 'master' of github.com:nvim-lua/kickstart.nvim into new-main

- It's not safe and can corrupt other git repos
- nvim-treesiter maintainers consider `prefer_git` as deprecated and no
  longer needed.

See nvim-treesitter PR for details: https://github.com/nvim-treesitter/nvim-treesitter/pull/6959

README.md

@@ -46,8 +46,8 @@ Neovim's configurations are located under the following paths, depending on your
 | OS | PATH |
 | :- | :--- |
 | Linux, MacOS | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` |
-| Windows (cmd)| `%userprofile%\AppData\Local\nvim\` |
-| Windows (powershell)| `$env:USERPROFILE\AppData\Local\nvim\` |
+| Windows (cmd)| `%localappdata%\nvim\` |
+| Windows (powershell)| `$env:LOCALAPPDATA\nvim\` |
 
 #### Recommended Step
 
@@ -77,13 +77,13 @@ git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HO
 If you're using `cmd.exe`:
 
 ```
-git clone https://github.com/nvim-lua/kickstart.nvim.git %userprofile%\AppData\Local\nvim\
+git clone https://github.com/nvim-lua/kickstart.nvim.git %localappdata%\nvim\
 ```
 
 If you're using `powershell.exe`
 
 ```
-git clone https://github.com/nvim-lua/kickstart.nvim.git $env:USERPROFILE\AppData\Local\nvim\
+git clone https://github.com/nvim-lua/kickstart.nvim.git $env:LOCALAPPDATA\nvim\
 ```
 
 </details>

init.lua

@@ -111,9 +111,12 @@ vim.opt.mouse = 'a'
 vim.opt.showmode = false
 
 -- Sync clipboard between OS and Neovim.
+--  Schedule the setting after `UiEnter` because it can increase startup-time.
 --  Remove this option if you want your OS clipboard to remain independent.
 --  See `:help 'clipboard'`
--- vim.opt.clipboard = 'unnamedplus'
+vim.schedule(function()
+  vim.opt.clipboard = 'unnamedplus'
+end)
 
 -- Enable break indent
 vim.opt.breakindent = true
@@ -157,14 +160,11 @@ vim.opt.scrolloff = 10
 -- [[ Basic Keymaps ]]
 --  See `:help vim.keymap.set()`
 
--- Set highlight on search, but clear on pressing <Esc> in normal mode
-vim.opt.hlsearch = true
+-- Clear highlights on search when pressing <Esc> in normal mode
+--  See `:help hlsearch`
 vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
 
 -- Diagnostic keymaps
-vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
-vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
-vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
 vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
 
 -- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
@@ -207,7 +207,7 @@ vim.api.nvim_create_autocmd('TextYankPost', {
 -- [[ Install `lazy.nvim` plugin manager ]]
 --    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
 local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
-if not vim.loop.fs_stat(lazypath) then
+if not vim.uv.fs_stat(lazypath) then
   local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
   local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
   if vim.v.shell_error ~= 0 then
@@ -237,11 +237,6 @@ require('lazy').setup({
   --
   -- Use `opts = {}` to force a plugin to be loaded.
   --
-  --  This is equivalent to:
-  --    require('Comment').setup({})
-
-  -- "gc" to comment visual regions/lines
-  { 'numToStr/Comment.nvim', opts = {} },
 
   -- Here is a more advanced example where we pass configuration
   -- options to `gitsigns.nvim`. This is equivalent to the following Lua:
@@ -476,7 +471,22 @@ require('lazy').setup({
     end,
   },
 
-  { -- LSP Configuration & Plugins
+  -- LSP Plugins
+  {
+    -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins
+    -- used for completion, annotations and signatures of Neovim apis
+    'folke/lazydev.nvim',
+    ft = 'lua',
+    opts = {
+      library = {
+        -- Load luvit types when the `vim.uv` word is found
+        { path = 'luvit-meta/library', words = { 'vim%.uv' } },
+      },
+    },
+  },
+  { 'Bilal2453/luvit-meta', lazy = true },
+  {
+    -- Main LSP Configuration
     'neovim/nvim-lspconfig',
     dependencies = {
       -- Automatically install LSPs and related tools to stdpath for Neovim
@@ -488,9 +498,8 @@ require('lazy').setup({
       -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
       { 'j-hui/fidget.nvim', opts = {} },
 
-      -- `neodev` configures Lua LSP for your Neovim config, runtime and plugins
-      -- used for completion, annotations and signatures of Neovim apis
-      { 'folke/neodev.nvim', opts = {} },
+      -- Allows extra capabilities provided by nvim-cmp
+      'hrsh7th/cmp-nvim-lsp',
     },
     config = function()
       -- Brief aside: **What is LSP?**
@@ -567,10 +576,6 @@ require('lazy').setup({
           -- or a suggestion from your LSP for this to activate.
           map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')
 
-          -- Opens a popup that displays documentation about the word under your cursor
-          --  See `:help K` for why this keymap.
-          map('K', vim.lsp.buf.hover, 'Hover Documentation')
-
           -- WARN: This is not Goto Definition, this is Goto Declaration.
           --  For example, in C this would take you to the header.
           map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
@@ -581,7 +586,7 @@ require('lazy').setup({
           --
           -- When you move your cursor, the highlights will be cleared (the second autocommand).
           local client = vim.lsp.get_client_by_id(event.data.client_id)
-          if client and client.server_capabilities.documentHighlightProvider then
+          if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_documentHighlight) then
             local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
             vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
               buffer = event.buf,
@@ -604,13 +609,13 @@ require('lazy').setup({
             })
           end
 
-          -- The following autocommand is used to enable inlay hints in your
+          -- The following code creates a keymap to toggle inlay hints in your
           -- code, if the language server you are using supports them
           --
           -- This may be unwanted, since they displace some of your code
-          if client and client.server_capabilities.inlayHintProvider and vim.lsp.inlay_hint then
+          if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_inlayHint) then
             map('<leader>th', function()
-              vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled())
+              vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf })
             end, '[T]oggle Inlay [H]ints')
           end
         end,
@@ -695,7 +700,8 @@ require('lazy').setup({
 
   { -- Autoformat
     'stevearc/conform.nvim',
-    lazy = false,
+    event = { 'BufWritePre' },
+    cmd = { 'ConformInfo' },
     keys = {
       {
         '<leader>f',
@@ -723,9 +729,8 @@ require('lazy').setup({
         -- Conform can also run multiple formatters sequentially
         -- python = { "isort", "black" },
         --
-        -- You can use a sub-list to tell conform to run *until* a formatter
-        -- is found.
-        -- javascript = { { "prettierd", "prettier" } },
+        -- You can use 'stop_after_first' to run the first available formatter from the list
+        -- javascript = { "prettierd", "prettier", stop_after_first = true },
       },
     },
   },
@@ -833,6 +838,11 @@ require('lazy').setup({
           --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
         },
         sources = {
+          {
+            name = 'lazydev',
+            -- set group index to 0 to skip loading LuaLS completions as lazydev recommends it
+            group_index = 0,
+          },
           { name = 'nvim_lsp' },
           { name = 'luasnip' },
           { name = 'path' },
@@ -869,7 +879,7 @@ require('lazy').setup({
       --
       -- Examples:
       --  - va)  - [V]isually select [A]round [)]paren
-      --  - yinq - [Y]ank [I]nside [N]ext [']quote
+      --  - yinq - [Y]ank [I]nside [N]ext [Q]uote
       --  - ci'  - [C]hange [I]nside [']quote
       require('mini.ai').setup { n_lines = 500 }
 
@@ -941,8 +951,6 @@ require('lazy').setup({
     config = function(_, opts)
       -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
 
-      -- Prefer git instead of curl in order to improve connectivity in some environments
-      require('nvim-treesitter.install').prefer_git = true
       ---@diagnostic disable-next-line: missing-fields
       require('nvim-treesitter.configs').setup(opts)
 

lua/kickstart/health.lua

@@ -6,13 +6,13 @@
 --]]
 
 local check_version = function()
-  local verstr = string.format('%s.%s.%s', vim.version().major, vim.version().minor, vim.version().patch)
-  if not vim.version.cmp then
+  local verstr = tostring(vim.version())
+  if not vim.version.ge then
     vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
     return
   end
 
-  if vim.version.cmp(vim.version(), { 0, 9, 4 }) >= 0 then
+  if vim.version.ge(vim.version(), '0.10-dev') then
     vim.health.ok(string.format("Neovim version is: '%s'", verstr))
   else
     vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))

lua/kickstart/plugins/debug.lua

@@ -24,6 +24,28 @@ return {
     -- Add your own debuggers here
     'leoluz/nvim-dap-go',
   },
+  keys = function(_, keys)
+    local dap = require 'dap'
+    local dapui = require 'dapui'
+    return {
+      -- Basic debugging keymaps, feel free to change to your liking!
+      { '<F5>', dap.continue, desc = 'Debug: Start/Continue' },
+      { '<F1>', dap.step_into, desc = 'Debug: Step Into' },
+      { '<F2>', dap.step_over, desc = 'Debug: Step Over' },
+      { '<F3>', dap.step_out, desc = 'Debug: Step Out' },
+      { '<leader>b', dap.toggle_breakpoint, desc = 'Debug: Toggle Breakpoint' },
+      {
+        '<leader>B',
+        function()
+          dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
+        end,
+        desc = 'Debug: Set Breakpoint',
+      },
+      -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
+      { '<F7>', dapui.toggle, desc = 'Debug: See last session result.' },
+      unpack(keys),
+    }
+  end,
   config = function()
     local dap = require 'dap'
     local dapui = require 'dapui'
@@ -45,16 +67,6 @@ return {
       },
     }
 
-    -- Basic debugging keymaps, feel free to change to your liking!
-    vim.keymap.set('n', '<F5>', dap.continue, { desc = 'Debug: Start/Continue' })
-    vim.keymap.set('n', '<F1>', dap.step_into, { desc = 'Debug: Step Into' })
-    vim.keymap.set('n', '<F2>', dap.step_over, { desc = 'Debug: Step Over' })
-    vim.keymap.set('n', '<F3>', dap.step_out, { desc = 'Debug: Step Out' })
-    vim.keymap.set('n', '<leader>b', dap.toggle_breakpoint, { desc = 'Debug: Toggle Breakpoint' })
-    vim.keymap.set('n', '<leader>B', function()
-      dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
-    end, { desc = 'Debug: Set Breakpoint' })
-
     -- Dap UI setup
     -- For more information, see |:help nvim-dap-ui|
     dapui.setup {
@@ -77,9 +89,6 @@ return {
       },
     }
 
-    -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
-    vim.keymap.set('n', '<F7>', dapui.toggle, { desc = 'Debug: See last session result.' })
-
     dap.listeners.after.event_initialized['dapui_config'] = dapui.open
     dap.listeners.before.event_terminated['dapui_config'] = dapui.close
     dap.listeners.before.event_exited['dapui_config'] = dapui.close

lua/kickstart/plugins/lint.lua

@@ -47,7 +47,7 @@ return {
       vim.api.nvim_create_autocmd({ 'BufEnter', 'BufWritePost', 'InsertLeave' }, {
         group = lint_augroup,
         callback = function()
-          require('lint').try_lint()
+          lint.try_lint()
         end,
       })
     end,

lua/kickstart/plugins/neo-tree.lua

@@ -11,7 +11,7 @@ return {
   },
   cmd = 'Neotree',
   keys = {
-    { '\\', ':Neotree reveal<CR>', { desc = 'NeoTree reveal' } },
+    { '\\', ':Neotree reveal<CR>', desc = 'NeoTree reveal' },
   },
   opts = {
     filesystem = {